25 * 1gram desiccant gel bags. As used in the Outback Cooler. Welldry Silica Gel is a traditional 3-side seal bagged desiccant product. Welldry Silica Gel has a high crush strength. Dustless. Superior absorbtion capacity under full range of temperature and humidity. Keeps dry after finshed absorbing. Chemical inert, non-corrosive & non-toxic High and steady performance under every humidity. Nontoxic and non-corrosive. Steady chemical property. High mechanical intensity. FDA approved desiccant sorbent for food and drug.
I have an Outback Cooler available for the NEW Meade DSI III and DSI Pro III. The Outback Cooler (Razorback) replaces the factory convection heat sink built into the DSI/DSI Pro rear case. The Outback cools and regulates the temperature of the CCD to reduce dark noise in the image. The Razorback version has a small controlled fan to assist with cooling.Shipping is US$18 for this item. Shipping is US$24 for this item.
The Outback Cooler (Razorback) replaces the factory convection heat sink built into the DSI/DSI Pro rear case. The Outback cools and regulates the temperature of the CCD to reduce dark noise in the image. The Razorback version has a small controlled fan to assist with cooling.Shipping is US$24 for this item.
I have an Outback Cooler available for the NEW Meade DSI III and DSI Pro III. The Outback Cooler (Dingo) replaces the factor convection heat sink built into the DSI/DSI Pro rear case. The Outback cools and regulates the temperature of the CCD to reduce dark noise in the image. The Dingo version has the Playtpus heat exchange and the Razorback heat sink fan to transfer heat from the camera.Shipping is US$24 for this item.
The Outback Cooler (Platypus) replaces the factory convection heat sink built into the DSI/DSI Pro & II rear case. The Outback cools and regulates the temperature of the CCD to reduce dark noise in the image. The Platypus version uses a liquid heat exchanger to transfer heat from the camera.Shipping is US$24 for this item.
I have an Outback Cooler available for the NEW Meade DSI III and DSI Pro III. The Outback Cooler (Platypus) replaces the factory convection heat sink built into the DSI/DSI Pro & II rear case. The Outback cools and regulates the temperature of the CCD to reduce dark noise in the image. The Platypus version uses a liquid heat exchanger to transfer heat from the camera.Shipping is US$24 for this item.
The Outback Cooler (Dingo) replaces the factor convection heat sink built into the DSI/DSI Pro rear case. The Outback cools and regulates the temperature of the CCD to reduce dark noise in the image. The Dingo version has the Playtpus heat exchange and the Razorback heat sink fan to transfer heat from the camera.Shipping is US$24 for this item.
The Outback Cooler (Platypus) can be retrofited to the Dingo configuration. You will need to ship your Outback to me to for this to occur. The Outback will be converted and tested and returned to you.
Liquid cooling hose will be required to and from the Outback (Platypus & Dingo). You can supply your own or purchase enough hose for your setup. Select quantity in units of one metre ( approx 3 ft). The hose is 6mm (1/4 inch) internal diameter. Similar to automotive vacum hose.
Just in cas ethere are other parts that could be shipped as a kit to help installation of the Outback (Platypus & Dingo). I don't have a source for pumps that will work on 12Volts at this stage.
Discontinued
Discontinued